Barrel, 7", W/dovetail Cut Smith & Wesson
Barrel, 7, W/dovetail Cut Smith & Wesson.
FITS: 41, .22
Big Book Catalog, Issue:68, Page:667
Suppressor Adapters Gemtech.
P22/M&P22 SUPPRESSOR ADAPTER
- Precision made to ensure alignment and avoid dangerous baffle strikes
- This is all you need to convert your S&W M&P 22 pistol (works with either the long or short P22 models) to use standard 1/2-28 muzzle accessories and suppressors
- Threaded M8 x .75 to 1/2-28 to fit any S&W M&P 22 or Walther P22 with the factory threaded barrel
- Includes knurled Gemtech thread protector
SIG MOSQUITO SUPPRESSOR ADAPTER
- M9 x .75 to 1/2-28 for SIG mosquito factory threaded barrel
- Includes thread protector
GSG 1911 .22 LR SUPPRESSOR ADAPTER
- This adapter will allow you to mount most any suppressor or muzzle accessory using 1/2-28 U.S. standard threading onto the SIG Sauer or German sport guns .22LR 1911 handguns
- Precision made to ensure alignment to avoid dangerous baffle strikes
- To install all you need to convert your pistol is to remove the original barrel cap from the pistol using the factory wrench, and then tighten the adapter in its place
- Includes a knurled thread protector for when you are not using your suppressor
- The adapters have a dark, blued protective finish
Barrel G27 Glock.
FITS: Glock® 27, 40 S&W
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Colt 1903 Barrel .32 Acp Us Armament Corporation.
Replacement Barrel for Original Colt-Manufactured 1903s or New Reproductions
Built to original factory specifications, this reproduction Colt 1903 replacement barrel will fit all late-production Types 3-5 and U.S. Armament’s reproduction 1903 General Officer’s Pocket Pistol. These barrels are machined from high-grade ordnance steel using the latest technology and come in-the-white, with no markings.
Even better, the Colt 1903 replacement barrel is also available in a threaded model, ready to accept the latest sound suppressor, so you can enjoy shooting your classic without creating "noise pollution!"
- Correct, original .32 ACP chambering
- Helps you preserve - or regain - your 1903’s superb accuracy
- 6 lugs at rear, single center lug for precise, tight lockup
- Due to manufacturing variations in old firearms, MAY require minor fitting
- Threaded model has 1/2"-24 tpi threads
With this Colt 1903 replacement barrel, you can get that old veteran back on the firing line doing what it was meant to do, or you can "suppressor-ize" your U.S. Armament 1903 pistol.
Barrel, .486 Wide Hood Smith & Wesson.
FITS: 4506, .45 ACP; 4506 R3, .45 ACP
Big Book Catalog, Issue:68, Page:667
Big Book Catalog, Issue:68, Page:668
1911 Straight Bored Barrel Bushing Egw.
Oversized For Precise Fitting; Beveled To Give A Streamlined Look
Straight-bored bushing, CNC machined from solid bar stock and designed for hand-fitting to obtain the best accuracy. Extra thick, .125" flange extends slightly farther than the original factory bushing for maximum barrel protection. Contoured, beveled edge around the flange provides a nice streamlined appearance and smooth holster entry and exit. Fits slides with .699"-.705" ID and barrel with .575"-.583" OD.
1911, Issue:11, Page:007
Big Book Catalog, Issue:71, Page:102
SPECS: Carbon steel, blued, or stainless steel, natural finish. .7015" OD, .568 ID. Gunsmith installation required.
Threaded Mid Line Barrel G19 Titanium Nitride Agency Arms Llc.
The First Step to a Suppressed Pistol
The Agency Arms Threaded Mid Line Barrel offers a number of beneficial features to Glock owners, not the least of which is the ability to attach a sound suppressor to their gun.
The Agency Arms Threaded Mid Line Barrel incorporates 416R stainless steel into its construction, ensuring that corrosion and excessive wear won't worry an owner.
- Incorporates pulled-broach rifling
- Uses 1:10 twist rate
- 1/2"x28 TPI threaded muzzle
- Titanium Nitride finish
The Agency Arms Threaded Mid Line Barrel also incorporates machined gear flutes on the circumference of the barrel to provide increased cooling properties.
Big Book Catalog, Issue:71, Page:219
Threaded Barrels For Glock® Voodoo Innovations.
The VooVoo Innovations Glock 17 9mm Match Grade Barrel is designed as an improved drop-in fit barrel for the Glock 17. The VDI 17 Barrel is machined to tighter fitment tolerances to increase accuracy potential without the need of gunsmith fitting. The barrel features a SAAMI spec 9mm Match chambering, Match Grade Rifling to allow the use of any 9mm projectile (not just jacketed bullets), threaded ½ x 28 TPI for use with 9mm suppressors and compensators, machined from 416R stainless steel, and Finished in Voodoo Innovations LifeCoat process. Includes VDI Thread Protector.