Steel Pilots Brownells
Steel Pilots Brownells.
Centers Cutters For Accurate Work
Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Select one of the following for other rifle/handgun muzzles, cylinder facing & chamfering tools.
|Steel One Caliber Set||45° Cutter & Steel Pilot|
|Brass One Caliber Set||45° Cutter & Brass Pilot|
|90° Cutter & Steel Pilot||Chamfering & Facing Combo Sets|
|90° Cutter & Brass Pilot||Brass Pilot Only|
Big Book Catalog, Issue:71, Page:458
Live Pilot Finish Chamber Reamer Manson Precision.
Cuts A Smooth, Precise Chamber With Less Chance Of Rifling Damage
Removable (live) pilot greatly reduces the risk of scratching the lands when cutting the chamber to final dimensions, so you get the best possible chambering job for maximum accuracy. Snug-fitting pilot helps provide extra-stable “live center” alignment to maintain proper chamber-to-bore alignment. Precision ground from high speed M7 tool steel for smooth, clean cutting and maximum service life. Includes one pilot for caliber listed.
Big Book Catalog, Issue:71, Page:455
SPECS: M7 high speed steel, in-the-white. Live pilot, six straight flutes, right hand cut. 3⁄8" (9.5cm) square drive shank. Includes one (1) pilot for caliber listed. .223 & .22-250 - .2185" pilot O.D. .308 & .30-06 - .2995" pilot O.D. .38-55 - .3655" or .3725" pilot O.D.
Air-Gauged Premium Barrel Douglas.
XX Grade; Hand-Selected For Uniformity To Within .0001"
Every barrel is precision, instrument-inspected for absolute straightness and, air gauged for maximum uniformity to yield the greatest accuracy possible. Land and groove tolerance from breech to muzzle can vary only .0001". Only a barrel that meets these demanding criteria wears the XX Premium stamp.
Big Book Catalog, Issue:71, Page:169
SPECS: Stainless or 4140 chrome moly steel, #7 contour, 27½" (69cm) long. Muzzle end marked for tightest taper. Not chambered or threaded. X-Long Unfinished blank 30" long.
Throating Reamers Manson Precision.
Outstanding Quality Reamers By Dave Manson Help You Produce Accurate Chambers
Engineered and ground by one of the most respected names in firearms reamers, Dave Manson. Superb quality reamers made to SAAMI specifications, ground from M7 steel to cut precise chambers capable of outstanding accuracy. Finish Chambering Reamers feature integral throater and solid, fixed pilots. Throating Reamers let you customize a chambering job for non-standard bullets or additional freebore length. Available as finish reamers unless listed otherwise.
Big Book Catalog, Issue:71, Page:453
SPECS: M7 High speed steel, in-the-white. Solid pilot, six, straight flutes, right-hand cut. Rimfire reamers have 1⁄4" (6.3mm) diameter round shank. Centerfire reamers have 3⁄8" (9.5mm) square drive shank. .50 BMG has a 1⁄2" round shank. Pistol reamers available with barrel pilot diameter for semi-auto and single shot pistols. .38 Super Nonte headspaces on case mouth.
Krieger Benchrest Barrel Blanks Krieger Barrels, Inc.
Krieger stainless steel competition rifle barrels usually appear on the top finisher's equipment lists in benchrest, high power, long range, and Palma competitions. Many top gunsmiths are recommending Krieger barrels because of their consistent quality and performance. This consistent performance is due to a combination of the processes Krieger employs - from 416 stainless steel made to their own specifications, the singe-point cut - rifling method used to rifle the barrels and the cryogenic treatment each barrel relieves before it is machined. We currently stock four different target style barrel blanks: 6mm Light Varmint Benchrest; .237inch bore, 29 inch blank 1:14 twist 1.2 inch breach diameter tapering to a muzzle of .875 inch. Weight: Approx 7lbs at 26 inches. 6mm Heavy Varmint Benchrest; .237 inch bore diameter, 269 inch blank 1:14 twist 1.25 inch breach diameter tapering to a muzzle diameter of .900 inch. Weight: Approx 7.5 lbs at 26 inches. 6.5mm 1:8.5 Twist Std Palma Taper 1.25 inch Breech Diameter .820 inch Muzzle Diameter) 30 inch Finished Length. Weight: Approx 5.5 lbs. 30 caliber 1:13 Twist Std Palma Taper 1.25 inch Breech Diameter .820 inch Muzzle Diameter 30 inch Finished Length. Weight: Approx 5.5 lbs.
Sinclair, Issue:5B, Page:238
SPECS: Cannot ship out of the US.
Contour 5 Douglas.
Match-Grade Barrel Blanks From U.S.'s Oldest Barrel Maker
Famous, Douglas Double XX, premium-grade barrels are an excellent choice for any rebarrelling project. Proven accuracy and finest care in manufacture. Button rifled for unequalled smoothness with tolerances for groove diameter and straightness held to .0005". .22 through .338 barrels feature 6- grooves while the .358, .375 and .458 barrels have 8. No straightening is done and all barrels are stress relieved.
Big Book Catalog, Issue:71, Page:171
SPECS: 4140 Chrome moly and stainless steel. "Finished" dimensions are shown in chart. Unturned Blanks will be .025" (.63mm)-.050" (1.3mm) larger in diameter and 1-½" (3.8cm) longer than shown. Not threaded or chambered. ORDERING: Advise: 1) Complete 9-digit Stock # from chart; 2) Caliber 3) Twist 4) Contour. If no Stock # is shown in the chart, that barrel must be ordered on a Special Order basis. Special Orders require Full payment in Advance and are non-cancelable and non-refundable. Not shipped prepaid.