Rimless Rifle Chambering Reamers Clymer

Shop for Best Price Rimless Rifle Chambering Reamers Clymer .Compare Price and Options of Rimless Rifle Chambering Reamers Clymer from variety stores in usa. 2014 products sale.

You are very lucky.The product you are looking for Rimless Rifle Chambering Reamers Clymer . We see discounts on products.

I think you are very lucky To be Get Rimless Rifle Chambering Reamers Clymer in cheap. I thought that Rimless Rifle Chambering Reamers Clymer is a great product. If purchased at the right price. not wonder you're looking for coupons. Please check prices best price before making a purchase. You will not be disappointed with Rimless Rifle Chambering Reamers Clymer .
Now you're looking for coupons or discounts at the low price. get coupon or Check price

"Today, if you do not want to disappoint, Check price before the Price Up.Rimless Rifle Chambering Reamers Clymer You will not regret if check price."


Best Rimless Rifle Chambering Reamers Clymer offers

cheap Rimless Rifle Chambering Reamers Clymer

The Rimless Rifle Chambering Reamers Clymer.Smart deals and fast shipping.Buy on Rimless Rifle Chambering Reamers Clymer now. Best Price Today! .

If you find product products sale, Shopping Deals.If at the time will discount more Savings So you already decide you want have Rimless Rifle Chambering Reamers Clymer for your, but you don't know where to get the best price for this Rimless Rifle Chambering Reamers Clymer. We already done the research and spend a lot of time for you. Rimless Rifle Chambering Reamers Clymer to find out where to get the best deal on Rimless Rifle Chambering Reamers Clymer .

If the Rimless Rifle Chambering Reamers Clymer is integrated that you must have, be sure to order now to stay away from disappointment Click on right here to find out exactly where to get the very best deal on Rimless Rifle Chambering Reamers Clymer.

Yes, you should check prices before you buy it.

 

Content:

Rimless Rifle Chambering Reamers Clymer.

$105.09 - $145.00
Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional ...

Product Description

Finest Workmanship & Quality; Made In USA From M-7 High Speed Steel

Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.

Note: If you do not see the caliber you are looking for below, please feel free to contact our Special Orders Department, as many additional items are avaliable from Clymer.


AR-15, Issue:11, Page:086
Big Book Catalog, Issue:71, Page:089
Big Book Catalog, Issue:71, Page:454

SPECS: RIFLE REAMERS - 6, right-hand cutting, straight flutes. Solid pilot, integral throat. Stocked in Rougher and Finisher. 7/16" round shank with 3/8" square drive. ¼" round shank on .22 RF. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.

Live Pilot Finish Reamers Clymer.

$145.00
These reamers are manufactured by CLYMER Precision using the best M42 w/ Cobalt HSS available. (Cobalt steel is more resistant to ...

Product Description

These reamers are manufactured by CLYMER Precision using the best M42 w/ Cobalt HSS available.  (Cobalt steel is more resistant to heat and abrasion than many other high-speed steels, which dramatically increases tools life and durability)

  • Manufacturer grade tooling
  • Smooth/free cutting guaranteed
  • Live pilot spindle threaded for 4-40 fillister head screw to easily attach industry standard bushings (no C clips required)
  • Oil grooves standard in pilot spindle to allow for muzzle flush chambering applications
  • Industry standard 7/16” shank with integral Weldon flat and 1/4-28 female threads
  • Live piloted reamers allow for customer to interchange bushings and achieve the proper fit to bore
  • Reamers ground to industry standard SAAMI specifications
     


Big Book Catalog, Issue:71, Page:454

Contour 5 Barrel Shilen.

$191.99 - $350.00
All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a ...

Product Description

Contour #5 in Chrome Moly or Stainless Steel

All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”.

Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request.

We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory.

Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.

Click here to view contour specifications.


Big Book Catalog, Issue:71, Page:170

SPECS: 4140 chrome-moly or 416 Stainless Steel. METRIC: 1 " (2.5cm), 1 lb. (.45kg).

Special Orders: If no Stock # is shown in the chart, that barrel must be ordered on a Special Order basis. Special Orders require Full Payment in Advance and are non-cancelable and non-refundable. Allow 8-10 weeks for delivery. Not shipped prepaid.

Pistol Chambering Reamers Clymer.

$75.09 - $115.30
Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional ...

Product Description

Cut Accurate Chambers For Rimmed, Rimless, & Rimfire Handgun Cartridges

Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.

Note: If you do not see the caliber you are looking for below, please feel free to contact our Special Orders Department, as many additional items are avaliable from Clymer.


Big Book Catalog, Issue:71, Page:454

SPECS: PISTOL REAMERS - 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16" dia. shank with 3/8 " square drive, depending on caliber, ¼" round shank on .22 RF. Stocked in Finisher style only. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.

Brass Pilots Brownells.

$25.99 - $35.99
Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.

Product Description

Centers Cutters For Accurate Work

Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.

Select one of the following for other rifle/handgun muzzles, cylinder facing & chamfering tools.

  Steel One Caliber Set   45° Cutter & Steel Pilot
  Brass One Caliber Set   45° Cutter & Brass Pilot
  90° Cutter & Steel Pilot   Steel Pilot Only
  90° Cutter & Brass Pilot   Chamfering & Facing Combo Sets

Big Book Catalog, Issue:71, Page:457
Big Book Catalog, Issue:71, Page:458
SPECS: Brass. 1¼" (3.2cm) long. .45 ACP Pilots - .45 ACP-1 fits S&W model 25 & 625. .45 ACP-2 fits Colt 1917.

Contour 4 Barrel...by Shilen Shilen.

$229.99 - $358.00
All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a ...

Product Description

Contour #4 in Chrome Moly or Stainless Steel

All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”.

Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request.

We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory.

Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.

Click here to view contour specifications.


Big Book Catalog, Issue:71, Page:170

SPECS: 4140 chrome-moly or 416 Stainless Steel. METRIC: 1 " (2.5cm), 1 lb. (.45kg).

Special Orders: If no Stock # is shown in the chart, that barrel must be ordered on a Special Order basis. Special Orders require Full Payment in Advance and are non-cancelable and non-refundable. Allow 8-10 weeks for delivery. Not shipped prepaid.

79° Muzzle Crowning Cutter Brownells.

$52.99
Hardened steel, muzzle crowning tool cuts a slight (11° less than square) target chamfer on barrels. Gives good rifling protection without going ...

Product Description

Cuts Popular "11\" Target Crown

Hardened steel, muzzle crowning tool cuts a slight (11° less than square) target chamfer on barrels. Gives good rifling protection without going too deep. 90° - 11° = 79°, hence the name. Eight, precision-machined flutes give smooth, chatter-free cuts to help eliminate extra lapping or stoning. ¼"-20 thread fits Brownells muzzle chamfering handles. Use with our muzzle pilots to ensure precise alignment with your bore. Available in ½" and ¾" diameters to accommodate most rifle/handgun barrel diameters.


Big Book Catalog, Issue:71, Page:457

SPECS: Tool Steel, 23/8” (6cm) overall length, ½" (1.3cm) or ¾" (1.9cm) O.D. ¼"-20 tpi.

Brass One Caliber Set Brownells.

$150.99 - $151.99
Set includes: one, 90° facing cutter to square a muzzle after shortening, or repair damage; one, 45° chamfering cutter to break the edges ...

Product Description

Square Up & Chamfer Rifle and Handgun Muzzles P Brass Bore Pilot

Set includes: one, 90° facing cutter to square a muzzle after shortening, or repair damage; one, 45° chamfering cutter to break the edges of the rifling for a clean bullet exit or chamfer a revolver cylinder mouth for quick reloads; plus one handle that fits either cutter and one brass bore pilot. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.

Select one of the following for other rifle/handgun muzzles, cylinder facing & chamfering tools.

  Chamfering & Facing Combo Sets   45° Cutter & Steel Pilot
  Steel One Caliber Set   45° Cutter & Brass Pilot
  90° Cutter & Steel Pilot   Steel Pilot Only
  90° Cutter & Brass Pilot   Brass Pilot Only

Big Book Catalog, Issue:71, Page:458
SPECS: Facing Cutter – Hardened steel. 3¼" (8.2cm) long (except .165" cutter, 2-3/8" (6cm) long). 1" (2.5cm) or .750" (19mm) diameter as required. Chamfer Cutter – Hardened steel. 3¼" (8.25cm) long (except .165" cutter, 2-3/8" (6cm) long). ½" (12.7mm) or 5/8" (15.8mm) diameter as required. Handle – Aluminum. 3½" (8.9cm) long. 3 oz. (85 g). Pilot - Brass. 1¼" (3.2cm) long. Packaged in a polypropylene box.

Rimmed & Belted Rifle Chambering Reamers Clymer.

$115.08 - $145.30
Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional ...

Product Description

Finest Workmanship & Quality; Made In USA From M-7 High Speed Steel

Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.

Note: If you do not see the caliber you are looking for below, please feel free to contact our Special Orders Department, as many additional items are avaliable from Clymer.


Big Book Catalog, Issue:71, Page:454

SPECS: RIFLE REAMERS - 6, right-hand cutting, straight flutes. Solid pilot, integral throat. Stocked in Rougher and Finisher. 7/16" round shank with 3/8" square drive. ¼" round shank on .22 RF. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.


Comments(0)

Leave a comments