Web Analytics

Gilchrist Precision Choke Reamer Chadwick & Trefethen

"Today, if you do not want to disappoint, Check price before the Price Up.Gilchrist Precision Choke Reamer Chadwick & Trefethen You will not regret if check price."  Gilchrist Precision Choke Reamer Chadwick & Trefethen cheap

Content:

Gilchrist Precision Choke Reamer Chadwick & Trefethen.

$36.99 - $114.99
Enters through the breech and pilots off the bore for precise cutter to bore alignment. Expandable, angle blade reamer fine tunes choke ...

Product Description

Aligns Reamer Concentric To The Bore For Accurate Choke Adjusting Or Removal

Enters through the breech and pilots off the bore for precise cutter to bore alignment. Expandable, angle blade reamer fine tunes choke size to improve patterns or removes choke prior to screw-in choke tube installation. Requires two Clymer Choke Tooling Bushings to center the cutter in the bore. Requires purchase of the Gilchrist Handle and two of the proper Clymer bore bushings for use with any of the reamers.


Big Book Catalog, Issue:71, Page:472

SPECS: Steel. Handle 25-½" (65cm) long. Reamers 13" (33cm) long. Expansion range: 20gauge "C" .593"- .656". 12gauge "D" .656" - .718". "E" .718" - .781". Select correct diameter bushing for 12 and 20 gauge from Clymer chart listed elsewhere. Pilots not available for 10 and 16 gauge. Tight choked 12 gauge barrels may require the use of the "D" reamer before using the "E" reamer.

Spiral Flute Long Forcing Cone Reamer Brownells.

$92.99 - $129.99
Lengthening the forcing cone area decreases pellet deformation and felt recoil for a dramatic improvement in pattern density, shooting comfort and overall shotgun ...

Product Description

Smooth Cutting Reamers Improve Pattern Density

Lengthening the forcing cone area decreases pellet deformation and felt recoil for a dramatic improvement in pattern density, shooting comfort and overall shotgun performance. Custom-made reamers with five, spiral flutes increase the cutting surface area for a smooth, chatter-free cut on all types of barrel steel. Do not use on chrome lined bores. Hex-drive shank allows the use of a standard square drive socket and T-handle.


Big Book Catalog, Issue:71, Page:473
SPECS: Tool steel, five flute, spiral cut, 6" (15cm) long, 1" (2.5cm) long hex section. Hex-drive size listed in chart.

45° Chamfer Cutters Brownells.

$58.99 - $62.99
A damaged or poorly-cut muzzle can really hurt accuracy; sharp edges on revolver cylinder chamber mouths can cause rounds to hang up going ...

Product Description

A damaged or poorly-cut muzzle can really hurt accuracy; sharp edges on revolver cylinder chamber mouths can cause rounds to hang up going into the cylinder - a real problem when using speedloaders. Cure both problems with this cutter.


Big Book Catalog, Issue:71, Page:457
Big Book Catalog, Issue:71, Page:458

SPECS: Cutter - 3-1/4" (8.25cm) long (except .17 caliber cutter - 2-3/8" (6cm) long). 1/2" (12.7mm) or 5/8" (15.8mm) diameter.

22 Cal 12-Flute Muzzle Chamfer Set Brownells.

$59.99 - $95.99
A ready-to-use combination of twelve-flute cutter and brass pilot for touching up those minor rifle muzzle imperfections that can destroy fine accuracy. Twelve ...

Product Description

Smooth, Chatter-Free Cutter & Interchangeable Brass Pilots

A ready-to-use combination of twelve-flute cutter and brass pilot for touching up those minor rifle muzzle imperfections that can destroy fine accuracy. Twelve flutes cut smooth and chatter free so no stoning, lapping or touch up is required. Hardened brass pilots won't scar or damage delicate rifling. A very handy tool to take along to the range or keep in your tool box, "just in case".


Big Book Catalog, Issue:71, Page:457
Big Book Catalog, Issue:71, Page:458
SPECS: Cutter - tool steel, 3¼" (8.2cm) long. Handle - aluminum 3½" (8.8cm) long. Pilot - brass, 1¼" (3cm) long. One Caliber Set includes cutter, pilot and handle.

.17 Caliber Rimfire Barrel Liners Redmans.

$50.99 - $57.99
There are untold thousands of rimfire .22’s over the country today that need only a barrel liner to bring them back to ...

Product Description

Easily & Professionally Reline Rimfire Rifle Barrels In Your Shop; Made By One Of The Most Respected Names In The Liner Industry

There are untold thousands of rimfire .22’s over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Plus, a lot of shooters want to convert to one of the .17 rimfires. Brownells .17 Barrel Liners, made by Redman Mfg., are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. With the Brownell system, barrel liner installation is not difficult. It can be done with a minimum of tools and shop equipment. Your original investment is quickly paid off in the first few jobs. The instruction booklet gives complete, easy-to-follow details for either the old, classic method of soldering the liners in or, the more modern method of using ACRAGLAS® for the permanent bond between barrel and liner.

You’ll find that along with a relining, most of your customers will also want a blue job (Solder or ACRAGLAS will both stand hot bluing temps); a stock refinish and probably action work - “Make it like new” are the usual instructions. This, you can do.

When deciding to offer this service for your trade areas, you should also consider the price and quality of some new guns today and tightening up of your customers’ spending habits. By relining, they can often have a better gun for less money.

Perfect for updating and converting .22 LR and .22 WRM rifles to popular .17 High Standard. Button rifled to give optimum accuracy. Available in 1-9 twist for bullets 30 grains and heavier, and 1-10 twist for bullets under 30 grains.

Barrel Liner Instruction Book details the systems used by gunsmiths Bob Schuetz, Willis Sprunger and Ralph Walker. Walker used a variable speed hand drill and ACRAGLAS to hold the liner in. Schuetz solders the liner in place. Sprunger extended a regular bit, drilled the hole in a lathe and bonded with ACRAGLAS. 8½" (21.6cm) x 11" (27.9cm). 16 pages. Instructions FREE, not included. Please request; not sent automatically or click here for a PDF.

WARNING: These Redman/Brownell gun barrel liners are made for specific cartridges. Only use with specified cartridges listed in item description below. To chamber these gun barrel liners in other calibers is dangerous and can cause serious bodily injury.


Big Book Catalog, Issue:71, Page:172

SPECS: 4140 steel. .172" (4.36mm) groove dia. 5/16" (7.9mm) O.D., 26-3/8" (67cm) overall, 25" (63.5cm) usable length. Not chambered.


Comments(0)

Leave a comments