Web Analytics

Steel One Caliber Sets Brownells

Buy Steel One Caliber Sets Brownells Even so, I hope that it reviews about it Steel One Caliber Sets Brownells will be useful. And hope I am a section of allowing you to get a better product. You will have a review and practical knowledge form here. Lets hope you will ensure and buy among Steel One Caliber Sets Brownells following read this review

 

Content:

Steel One Caliber Sets Brownells.

$150.99
Set includes: one, 90° facing cutter to square a muzzle after shortening, or repair damage; one, 45° chamfering cutter to break the edges ...

Product Description

Square Up & Chamfer Rifle & Handgun Muzzles - Steel Bore Pilot

Set includes: one, 90° facing cutter to square a muzzle after shortening, or repair damage; one, 45° chamfering cutter to break the edges of the rifling for a clean bullet exit or chamfer a revolver cylinder mouth for quick reloads; plus one handle that fits either cutter and one steel bore pilot. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.

Select one of the following for other rifle/handgun muzzles, cylinder facing & chamfering tools.

  Chamfering & Facing Combo Sets   45° Cutter & Steel Pilot
  Brass One Caliber Set   45° Cutter & Brass Pilot
  90° Cutter & Steel Pilot   Steel Pilot Only
  90° Cutter & Brass Pilot   Brass Pilot Only

Big Book Catalog, Issue:71, Page:458
SPECS: Facing Cutter – Hardened steel. 3¼" (8.2cm) long (except .165" cutter, 2-3/8" (6cm) long). 1" (2.5cm) or .750" (19mm) diameter as required. Chamfer Cutter – Hardened steel. 3¼" (8.25cm) long (except .165" cutter, 2-3/8" (6cm) long). ½" (12.7mm) or 5/8" (15.8mm) diameter as required. Handle – Aluminum. 3½" (8.9cm) long. 3 oz. (85 g). Pilot - Hardened steel. 1¼" (3.2cm) long. Packaged in a polypropylene box.

Contour 6 Barrel Shilen.

$239.99 - $290.99
All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a ...

Product Description

Contour #6 in Chrome Moly or Stainless Steel

All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”.

Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request.

We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with eight lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003". No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory.

Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.

Click here to view contour specifications.


Big Book Catalog, Issue:71, Page:170

SPECS: 4140 chrome-moly or 416 Stainless Steel. METRIC: 1 " (2.5cm), 1 lb. (.45kg).

Special Orders: If no Stock # is shown in the chart, that barrel must be ordered on a Special Order basis. Special Orders require Full Payment in Advance and are non-cancelable and non-refundable. Allow 8-10 weeks for delivery. Not shipped prepaid.

Contour 7 Douglas.

$246.99 - $313.99
Famous, Douglas Double XX, premium-grade barrels are an excellent choice for any rebarrelling project. Proven accuracy and finest care in manufacture. Button rifled ...

Product Description

Match-Grade Barrel Blanks From U.S.'s Oldest Barrel Maker

Famous, Douglas Double XX, premium-grade barrels are an excellent choice for any rebarrelling project. Proven accuracy and finest care in manufacture. Button rifled for unequalled smoothness with tolerances for groove diameter and straightness held to .0005". .22 through .338 barrels feature 6- grooves while the .358, .375 and .458 barrels have 8. No straightening is done and all barrels are stress relieved.

Click here to view contour specifications.


Big Book Catalog, Issue:71, Page:171

SPECS: 4140 Chrome moly and stainless steel. "Finished" dimensions are shown in chart. Unturned Blanks will be .025" (.63mm)-.050" (1.3mm) larger in diameter and 1-½" (3.8cm) longer than shown. Not threaded or chambered. ORDERING: Advise: 1) Complete 9-digit Stock # from chart; 2) Caliber 3) Twist 4) Contour. If no Stock # is shown in the chart, that barrel must be ordered on a Special Order basis. Special Orders require Full payment in Advance and are non-cancelable and non-refundable. Not shipped prepaid.

308 Match Reamer Clymer.

$105.34
Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the ...

Product Description

Ream Tighter Chambers For .308 Match Ammo

Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for.


Big Book Catalog, Issue:71, Page:453

SPECS: High speed steel, finish reamer only.

Back-Bore Reamers Clymer.

$45.40 - $90.40
Back-boring reamers are invaluable for all shops that do shotgun work, especially choke and barrel modifications. Reamers available in .005" increments from ...

Product Description

Enlarges Bore To Easily Change Bore-To-Choke Constictions

Back-boring reamers are invaluable for all shops that do shotgun work, especially choke and barrel modifications. Reamers available in .005" increments from .725" to .740" in 12 gauge. Lead angle of reamer matches the angle of most chokes to blend into an existing choke.

Many possible uses. Shortened barrels may be back-bored to within 2" to 3" of muzzle to provide a degree of constriction or "choke" in what would otherwise be a cylinder bore barrel. A choked barrel can be back-bored to enlarge the bore to provide "extra" constriction for competitive shooters. For rough pitted bores, these reamers provide an effective and efficient means of removing pits to enhance both appearance and performance. Faster and more effective than grinding or polishing. 12 gauge, 34" extension handles available.


Big Book Catalog, Issue:71, Page:472

SPECS: Reamers 5" (12.7cm) long. Made of M-7 high speed steel, hardened and drawn. Advise Reamer Stock # from chart.


Comments(0)

Leave a comments